Have you noticed an unpleasant stain forming at the base of your toilet? Is it particularly rough and resists all your efforts to remove it with a toilet brush? Many people frequently face this problem.
It’s natural for unpleasant stains to form at the bottom of the toilet. However, the good news is that they are not impossible to remove. And we are here as plumbers in Marbella to provide you with all the information you need on what to do and how to clean it properly.
Why do you need to clean the hole at the bottom of the toilet?
The syphon, or the hole at the bottom of the toilet, is an important part of the toilet flush system. Its purpose is to provide strong suction that pulls waste from the bowl and carries it down the drainpipe. However, this hole can get blocked over time with mineral deposits, germs, and other debris. This can lead to reduced flushing power, blockages, and unpleasant odors.
As a result, keeping the hole at the bottom of the toilet clean and clear is essential for ensuring the toilet works properly and maintains good hygiene.
How stains form at the bottom of the toilet
Toilet stains occur from various sources, including the buildup of hard water minerals, mold, and fungi caused by moisture and lack of air circulation, bacteria that feed on organic waste like urine and feces, and rust from corroded pipes.
Regular cleaning with the right products and procedures is essential to prevent and remove stains. Scrubbing the inside of the toilet bowl regularly with a cleaner and a toilet brush will help keep it clean and stain-free.
How to clean a hole at the bottom of the toilet
Cleaning the hole at the bottom of the toilet is a simple task because it is part of the toilet bowl and gets cleaned along with it. It requires some effort if everything is dirty and needs to be cleaned individually. Here are some solutions for cleaning a hole at the bottom of the toilet.
1. Use HARPIC Power (or any chemical product with a similar concentration)
HARPIC Power (or a similar chemical product of your choice) is a chemical used to remove deep stains from toilet bowls. HARPIC Power is a household staple often used for cleaning bathrooms and toilets. Below are five steps you should follow to clean the toilet hole with HARPIC Power.
Step 1: Dry the toilet bowl. The HARPIC Power system works best when the toilet bowl is dry. If you don’t use the toilet for about 2 or 3 hours and remove the water from the bowl, it will dry.
Step 2: Pour in the HARPIC Power. After drying the bowl, pour the HARPIC Power at the bottom of the toilet bowl. The amount of chemical used depends on whether the stains are deep or light.
Step 3: Wait.
After applying the HARPIC powder to the bowl, you should not start cleaning immediately; you should wait about an hour to begin scrubbing. Over time, the stains will start to dissolve on their own, and only minimal scrubbing will be needed.
Step 4: Cleaning. Start by scrubbing the toilet with the brush you previously used. To clean the hole at the bottom of the toilet, use a small brush that can easily fit inside. The hole is small, and some toilet brushes may be too large to fit in.
Step 5: Flush the toilet. After cleaning the toilet, the final step is to flush. When you flush, the stains will have been removed. The toilet will be clean, shiny, and ready to use.
2. Use vinegar and baking soda
As a plumber in Marbella, we know that vinegar and baking soda are two of the most effective natural cleaning solutions for cleaning your toilet’s siphon. To use this method, you should:
- Fill the toilet bowl with a cup of baking soda, getting as close as possible to the siphon jet.
- Add a cup of white vinegar to the bowl and let the two ingredients mix and bubble for a few minutes.
- Scrub the inside of the bowl with a toilet brush, paying particular attention to the siphon jet.
- Let the paste sit in the bowl for about thirty minutes.
- Flush the toilet and repeat the process as needed.
After this, the hole at the bottom of the toilet will be clean and look new. If this step doesn’t help much, move on to the next method.
3. Bleach
Another substance used to clean the bottom of the bowl is bleach. Bleach is used for cleaning, and you are likely familiar with it, as it is a common product used to unclog sinks or pipes blocked by debris.
The cleaning method with bleach is the same as with pressure cleaning. After drying the surface, add bleach, wait a few minutes, and then start cleaning. This method cleans the toilet bowl and the hole; no complicated techniques are required.
4. Coca-Cola
Due to its acid content and carbonation, Coca-Cola (or any generic cola brand) can also be used for various cleaning tasks and unclogging. If you don’t have other options, it’s worth trying, but experts recommend using other methods first since Coca-Cola is less effective than vinegar and more expensive.
You can also go to the store and buy an acidic toilet cleaner. This will surely remove stains, but since it contains much stronger acids like hydrochloric acid, it’s more harmful to the environment. It will also damage your eyes and skin if used without protection, so use it only if you have no other option.
5. Lemon juice
If you prefer a more pleasant scent, you can clean the toilet siphon with lemon juice instead of vinegar. Here’s how to do it:
- Squeeze the juice of a lemon into the toilet bowl.
- Add a cup of baking soda to the bowl, then stir the ingredients until a paste forms.
- Scrub the inside of the bowl with a toilet brush, focusing on the siphon jet.
- Let the mixture sit in the bowl for about 30 minutes.
- Flush the toilet and repeat the process as necessary.
You can also hire plumbing services in Marbella for the
